3M 11-71315-227-01 Benutzerhandbuch

3M™ MicroTouch™ Display C1500SS Installation Guide 

21 

 

3M Touch Systems Proprietary Information 

If you have a problem setting up or using your display, you may be able to solve it 
yourself. Before calling 3M Touch Systems, try the suggested actions that are appropriate 
to the problems you are experiencing with the display. You may also want to consult 
your video card user’s manual for additional troubleshooting advice. 

To maintain your display and keep your display operating at peak performance: 
•  Keep your display and sensor clean 
•  Adjust the display video controls. Refer to Chapter 4 for more information. 
•  Do not install the display in a place where ventilation may be hindered. Always 

maintain adequate ventilation to protect the display from overheating and to ensure 
reliable and continued operation. 

The touch sensor requires very little maintenance. 3M Touch Systems recommends that 
you periodically clean the glass touch sensor surface. 

Typically, an isopropyl alcohol and water solution ratio of 50:50 is the best cleaning 
agent for your touch sensor. You can also use straight isopropyl alcohol. In addition, 3M 
Touch Screen Cleaner CL680 has been tested and approved for this use. Be sure to follow 
solvent manufacturer's precautions and directions for use when using any solvents. 
•  It is important to avoid using any caustic chemicals on the touch sensor. Do not use 

any vinegar-based solutions. 

•  Always dampen the cloth and then clean the sensor. Be sure to spray the cleaning 

liquid onto the cloth, not the sensor, so that drips do not seep inside the display or 
stain the bezel. 

•  Apply the cleaner with a soft, lint-free cloth. Avoid using gritty cloths. 
•  Always handle the touch sensor with care. Do not pull on or stress flex tail.