3M M2256PW Benutzerhandbuch

3M™ Multi-touch Display M2256PW User Guide 

 

19 

3M Touch Systems, Inc. Proprietary Information – 37531 Rev D

Remember that Windows™ 7 does not require any additional software to enable 
multitouch functionality. 

However, for Windows™ XP, Vista or Linux® operating systems, 3M™ MicroTouch™ 
Software enables your M2256PW Multi-touch Display to work with your computer. 
3M™ MicroTouch™ Software includes a control panel for setting your touch sensor 
preferences and a diagnostic utility. If you are experiencing problems with the touch 
sensor, you can use the diagnostic utilities provided to test the system. 

For more information on installing this software and using the control panel, refer to the 
3M™ MicroTouch™ Software User Guide on the accompanying CD or on the corporate 
website at 

www.3m.com/touch

. 

The M2256PW has been calibrated prior to shipment and the display as delivered should 
not require video alignment. You should be able to accurately touch icons on the sensor. 
If for some reason, you cannot do this, the touch sensor’s active area may not be aligned 
to the underlying video.  

Regardless of the operating system, after you connect your touch display: 

ƒ If you are using Windows 7, you may calibrate by accessing the Software Diagnostic 

Utility (SDU) found on the enclosed CD.  

Launch the SDU from the CD. Select the Tools menu and highlight Calibration. The 
screen below appears and you should touch the 2 targets as they appear. Press 
Escape to cancel Calibration.