3M 11-81375-227 Benutzerhandbuch

Seite von 35
14 
 
3M™ MicroTouch™ Display M1500SS User Guide 
3M Touch Systems, Inc. Proprietary Information 
Access to the Video Controls 
The controls for adjusting the video display are located on the front of the M1500SS 
Display.  These buttons let you display the on-screen menu and adjust the phase, image 
position, contrast, and brightness.  Make sure you have unobstructed access to the video 
controls once the M1500SS Display is installed. Refer to Chapter 3 for more details on 
these controls. 
Figure 5 Video Display Controls  
             
Adjusting the Viewing Angle 
The yoke and spine were designed with touch stability in mind.  This innovative design 
keeps the display face stable during touch. The unit can be adjusted to any locked 
position from 0 up to 60 degrees from vertical. This allows for users of different heights 
to view the display at the angle that best suits them with no degradation in touch 
stability. 
Turn the positive locking mechanism adjustment knob one quarter turn (horizontal to 
vertical) to loosen. Adjust the M1500SS Display by pushing on the top front of the 
display until the screen is at the best viewing angle for you. Then turn the adjustment 
knob a 1/4 turn back to lock in place. To raise the display back to vertical, unlock the 
adjustment knob, lift slightly on the adjustment knob and pull up. 
Figure 6  Viewing Angle Adjustable from 0 up to 60 degrees 
SELECT
Ż/Left
Ź/Right
LED
Microphone
MENU