3M 11-81375-227 Benutzerhandbuch

26 

 

3M™ MicroTouch™ Display M1500SS User Guide 

3M Touch Systems, Inc. Proprietary Information 

• H-Position is used to adjust the horizontal image position manually.  
• V-Position is used to adjust the vertical image position manually. 

Use the 

Ż/left and Ź/right arrow buttons to scroll through the image menu. 

Phase: If the phase of your display is not fine-tuned, you may observe unstable 
horizontal noise lines and cross-talk stretching from the edge of small windows on your 
display.  

If you change your display to Windows shut down mode, this noise will be more visible, 
and easier to eliminate. Click on the "Start" button at the bottom right side, and then 
click Shut Down. This will bring you to the Windows shutdown mode. After finishing 
phase adjustment, click on the "Cancel” to return to your original Windows display. 

Clock: If the clock setting of your image is not fine-tuned, you may observe periodic 
vertical bars of video noise on your image. These bars of noise are usually adjusted out 
when an Auto Configuration is performed. If the bars of noise are still present, this 
setting can be adjusted manually. 

Adjust this setting so that either the vertical bars of noise are replaced by an even amount 
of noise across the whole screen, or the noise disappears completely.  

If you do an Auto Config, the display will try to find the best Clock/Phase setting. If you 
are not satisfied with the auto adjustment, fine-tune the phase manually as described 
above.