Planar LX1200TR Benutzerhandbuch

Seite von 20
  LX1200TR User’s Manual (020-0512-00A) 
 
Page 8 of 20
 
 
 
 
Step 2 — Connecting the Monitor 
Once the LX1200TR is mounted in place, connect it to the computer (or other video source) and the 
12 VDC power supply as follows. 
Note: 
This procedure refers to connections to and from the computer. However, 
depending on your particular hardware configuration, these connections may be to a 
dock or other device rather than directly to the computer. 
1.  As needed, route any data and power cables from the computer to the monitor. 
2.  Make sure the computer is turned off. 
3.  Connect the 12 VDC power supply cable to the monitor’s power supply. 
Notes: 
Use a 5-Amp fuse in line to the power source. 
 
Also, to extend battery life, you should install a device that shuts off power to the 
monitor while the monitor is inactive. (An example is First Mobil Technologies’ 
Voltage Armor product. www.firstmobiletechnologies.com.)