Pioneer PRO-FHD1 Benutzerhandbuch

En

This Plasma Display is equipped with a DVI terminal (INPUT1) 
which accept digital video.

Before starting the menu, press 

INPUT 1 on the remote control 

unit  to select INPUT1. 

• See the section “Computer compatibility chart” (page 37) 

regarding supported computer signals.

To activate the DVI terminal:

When you use the INPUT1 terminal, use the following 
procedure to activate the terminal.

Press 

HOME MENU.

Select “Setup” ( /  then 

ENTER (ENTER/DISP.)).

Select “INPUT1” ( /  then 

ENTER (ENTER/DISP.)).

Set the “AV” setting.

Press 

HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit 

the menu.

• See the section “Watching an image from a personal 

computer” (page 36) regarding connections to a computer.

To specify the type of digital video signals:

Repeat steps 1 to 3 rovided for “

”.

Select “Video” ( / ).

Select the type of digital video signals ( / ).

Press 

HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit 

the menu.

• This selection is disabled when “Signal Type” is set to “PC”. 

For details on setting the signal type, see the section “

activate the DVI terminal”.

• If the images do not come in crearly, specify another digital 

video signal type.

• For the digital video signal types to be specified, check the 

operation manual that came with the connected equipment.

Use the INPUT4, 5 or 6 terminal when connecting to a DVD 
player and other audiovisual equipment.

1920*1080i@50 Hz

720*576p@50 Hz

1280*720p@50 Hz

1920*1080i@59.94/60 Hz

720*480p@59.94/60 Hz

1280*720p@59.94/60 Hz

AUDIO cable 
(commercially available)

DVI-D cable 
(commercially 
available)

Didital RGB signals (16 to 235) locked

Didital RGB signals (0 to 255) locked

1920*1080p@24 Hz

1920*1080i@50 Hz

1920*1080i@59.94/60 Hz

1280*720p@50 Hz

1280*720p@59.94/60 Hz

720*576p@50 Hz

720*576i@50 Hz

720*480p@59.94/60 Hz

720*480i@59.94/60 Hz

AUDIO cable 
(commercially available)

Component cable
(commercially available)

BNC/Pin 
conversion 
adaptor