Samsung MD230X3 Benutzerhandbuch
Troubleshooting
5-1
5
Troubleshooting
5-1
Monitor Self-Diagnosis
•
You can check if the product is working properly using the Self-Diagnosis function.
•
If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform
the self-diagnosis function according to the procedures below.
the self-diagnosis function according to the procedures below.
1.
Turn the product and the PC off.
2.
Separate the D-Sub cable from the product .
3.
Turn the product on.
4.
If the product is working properly, the 'Check Signal Cable' message appears.
In this case, if a blank screen is displayed again, make sure that there is no problem with the PC and the connection. The
product is working properly.
In this case, if a blank screen is displayed again, make sure that there is no problem with the PC and the connection. The
product is working properly.