Panasonic AJ-HRW10G Benutzerhandbuch

13

•  When connecting the unit to a computer using a LAN 

cable, attach the two ferrite cores 
(included) on the LAN cable, one 
5–10 cm from the computer LAN port 
and the other 5–10 cm from the LAN 
port on the unit. 

   Failure to attach ferrite cores could 

cause interference with nearby 
equipment.

•  After attaching the ferrite cores as 

shown at right, close them until they click and lock 
into place.

•  If a ferrite core moves along the cable and cannot 

be fixed in place, attach binders on both sides of the 
ferrite core to immobilize it.
Cut the binders with scissors to adjust the length.

•  Handle ferrite cores with care. Dropping or subjecting 

the cores to impact may break them in two.

• Always use a shielded LAN cable.

Use an external DC power supply rated at 100 W or 
more.
Read the DC power supply user manual carefully 
before use.
Always use a shielded DC cable.

Use a battery rated at 100 W or more. Read the 
battery user manual carefully before use.