Panasonic AJ-HRW10G Benutzerhandbuch

15

Confirm that the battery or external DC power supply 
is firmly connected to the unit. Please refer to the 
operation instructions of this unit for the details of 
access.

After setting the rear POWER switch to ON, press the 
front POWER button to turn the unit on.
While the unit is starting up, the startup screen 
appears on the LCD panel display.
About one minute later, the main screen appears.  The 
unit can now be used.

•  The unit will automatically shut down if a low-voltage 

error occurs. Switch to another, fully charged battery 
or use an external DC power supply.

•  When the temperature is below the rating 

temperature of HDD, the HDD may be damaged. 
Please move the unit to a warmer place and do 
not use it until the temperature is melt. When the 
temperature is above the rating temperature of HDD, 
the HDD may be damaged. Please move the unit to 
a cooler place and do not use it until the temperature 
is melt. (You can check the HDD temperature on the 
screen after startup.)
For the rating temperature, refer to the specifications 
of each HDD used.

To turn off the power, either press the front POWER 
button or the EXIT button on the main screen 
displayed after startup, and then press the OFF button 
or RESTART button on the shutdown method selection 
screen displayed next.
The power is now turned off automatically.

A
B

C

D

A  OFF button

After shutdown is completed, the power is turned 
off automatically.

B  RESTART button

After shutdown is completed, the unit is restarted 
automatically.

C  OK button

The shutdown method, which was selected on the 
shutdown method selection screen, is executed.

D  CANCEL button

The main screen that was displayed previously is 
now restored.

Although the front POWER LED goes off, power is still 
consumed if the rear POWER switch is not set to OFF. 
Also set the rear POWER switch to OFF when the unit 
is not used.