Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Panasonic
  4. AJ-HRW10G
  5. Benutzerhandbuch

Panasonic AJ-HRW10G Benutzerhandbuch

Download
Seite von 48
18
Setting the RAID function (continued)
When RAID is re-set, the data on the HDD will be 
deleted so take care before proceeding.
This is used when specifying either JBOD mode with 
separate logical drive names for each HDD or RAID1 
mode with mirrored HDDs.
This job is required when installing a new HDD.
A
B
(In the RAID1 mode)
D
C
E
(In the JBOD mode)
A
B
D
C
E
A  RAID1 button
This is used when writing the same data 
simultaneously onto two HDDs.
B  JBOD button
Using each HDD as an individual device.
C    HDD-related information
The HDD manufacturer name, product number, and 
disk size will be displayed on the right-hand side of 
the button.
In JBOD mode, the HDD may be selected with the 
button on the left.
D  NEXT button
This continues settings.
E  CLOSE button
Return to the main screen.
Setting up RAID drives (Create RAID)
Viewing basic RAID information 
(Basic Information)
The statuses concerning the HDDs used and RAID are 
displayed.
A
B
C
A   Physical Drive
The following information about the HDD installed is 
displayed.
   ● Drive Model
    Display the HDD product numbers.
   ● Port
     Display the numbers of the ports where the RAID 
boards are connected
   ● Temperature
    Display the temperatures of the HDDs
   ● Capacity
    Display the memory sizes of the HDDs
   ● Status
    Display the statuses of the individual HDDs
B  Logical Drive
   ● Assigned Name
    Display the setting names
   ● Raid Level
    Display either JBOD or RAID1
   ● Capacity
    Display the memory size of the HDDs
   ● Status
    Display the statuses
   ● UNMOUNT button (page 17)
     Press this when logically isolating the HDD 
before it is unmounted.
If the HDD is not installed, this button will not be 
displayed.
C    CLOSE button
Return to the main screen.