Panasonic AJ-HRW10G Benutzerhandbuch

40

“SMART” is an abbreviation of “Self-Monitoring, 
Analysis and Reporting Technology”.
This function is incorporated within hard disk drives in 
order to quickly discover any problems the drive and 
estimate the extent of the damage.

A

B

C

E

D

A  S.M.A.R.T. Information

     The model numbers of the HDD currently used 

are displayed in this column.

     The current temperatures of the HDD are 

displayed in this column.

     The total power-on time of the HDD are 

displayed in this column.

     These can be used to set the Write Cache of the 

HDD to ON or OFF.
ON button:
  The response to data writing is faster but it may 
actually take a short while for the data to be 
written on the HDD.

    OFF button:
     The response time is longer than at the ON 

setting, but the data will definitely be written.  
(This is the factory setting.)

B   Temperature Threshold Set

Alarm messages are displayed if HDDs exceed the 
specified temperature. If the APPLY button is not 
pressed after these settings have been changed, 
the new settings will not be reflected.

      When the temperature falls below this setting, 

the low-temperature alarm is displayed. (Factory 
setting: 5 °C)

     When the temperature rises above this setting, 

the high-temperature alarm is displayed. (Factory 
setting: 55 °C)

     When this is pressed, the temperature setting is 

increased.

     When this is pressed, the temperature setting is 

reduced.

When these settings are changed, the following 
message is displayed.

C   Operation Time

Displayed here is the main unit's operation time.

D  APPLY button

Set the Write Cache mode and the Temperature 
Threshold Set value in the S.M.A.R.T. Information 
box.

E  CLOSE button

Return to the main screen.