Panasonic AJ-HRW10G Benutzerhandbuch

6

A  Front POWER LED

Lights when the unit is ON.
When the LED goes off and the rear POWER 
switch is ON, electric power is still consumed.
Always turn the rear POWER switch OFF when the 
battery is not used.
When an external DC power supply is used, 
standby power will continue to be consumed so set 
the rear POWER switch to OFF.

B  Front POWER button

This button is used to start up the unit and shut it 
down.
When it is at the OFF setting:
 

 The unit starts up when the front POWER 
button is pressed.

When it is at the ON setting:
 

 The unit shuts down automatically when the 
front POWER button is pressed. After the unit 
has shut down, set the rear POWER switch to 
OFF.

C   Grips

This is the handle for carrying the unit.

D  HEADPHONES jack

Use mini-jack HEADPHONE.

E  LCD panel with touch panel

All the operations are done on the touch panel 
except power ON and OFF.

HEADPHONES

HDD1

HDD2

A

F

B

C

G

D

E

H

I

J

K

F  5-inch bay units used to install the HDD

You can install the HDD (SATA) which you 
purchased with the 5 inch bay unit.
For details on the installation method and the 
HDDs which can be used, refer to the procedure 
described separately, and proceed with the 
installation. (page 9)

G  P2 Drive

The P2 drive has been installed.

H  Power Indicator

This indicator lights up in green when the P2 drive 
is running.

I  Status Indicator

This indicator blinks in green during access to a P2 
card.

Do not remove the P2 card during access of the 
card, otherwise files may be corrupted, or the P2 
card may fail.

J  Card Slots

The P2 drive’s card slots are designed for P2 cards.
The P2 drive does not operate with cards other 
than P2 cards.

K  EJECT Button

To remove a P2 card, press this button so that the 
button pops out, then press it in again.