Philips PCA103CD Benutzerhandbuch
I
NSTALLING
Y
OUR
D
RIVE
2
5
audio) connector, labeled “Audio.” The
unlabeled jumpers on both models are for
factory testing only.
unlabeled jumpers on both models are for
factory testing only.
6. Plug a free IDE connector inside your PC into the
drive’s
socket. The cable’s colored
edge must be aligned with the Pin 1 position.
Note: If you have a sound card that has an IDE port,
you can either connect the CD-ROM drive to
your PC or to the sound card. You must then
disable the unused secondary IDE port. See
Appendix A for what a secondary IDE port is
and refer to your sound card, PC or IDE
controller manual for the instructions on
disabling the unused secondary IDE port.
your PC or to the sound card. You must then
disable the unused secondary IDE port. See
Appendix A for what a secondary IDE port is
and refer to your sound card, PC or IDE
controller manual for the instructions on
disabling the unused secondary IDE port.
7. If you have a sound card with a 4-pin CD-ROM audio
connector, use the supplied audio cable to connect
it to the drive’s “
” connector (the
“
” connector on PCA103CD).