Seagate ST423451N/W/WD Benutzerhandbuch
38
Elite 23 Installation Guide, Rev. A
W/WD drives
W/WD drives section
Setting the SCSI ID jumpers
Use the J4A jumper block to set the SCSI ID (Figure 11) on mod-
els ST423451W/WD. To change the SCSI ID, install jumpers on
the appropriate pins as shown in the illustration.
els ST423451W/WD. To change the SCSI ID, install jumpers on
the appropriate pins as shown in the illustration.
Figure 11.
Setting the SCSI ID on W/WD models
SCSI ID = 0 (default)
J4A
SCSI ID = 1
SCSI ID = 2
SCSI ID = 3
SCSI ID = 4
SCSI ID = 5
SCSI ID = 6
SCSI ID = 7
SCSI ID = 8*
SCSI ID = 9*
SCSI ID = Ah (10)*
SCSI ID = Bh (11)*
SCSI ID = Ch (12)*
SCSI ID = Dh (13)*
SCSI ID = Eh (14)*
SCSI ID = Fh (15)*
Pin 1
Pin 15
J01
J4A
J6
SCSI I/O
Connector
DC Power
Connector
Connector
J4B
Pin 1
Pin 1