Seagate ST32151N/W/WC Benutzerhandbuch
10
Hawk 2XL Family Installation Guide, Rev. C
_______________________________________________________________________________________________________________________
Drive configuration
You can easily install your new Seagate disc drive as your first
ever hard drive, a replacement or as a second drive in a com-
puter system with an existing hard disc drive.
ever hard drive, a replacement or as a second drive in a com-
puter system with an existing hard disc drive.
Installation involves the following steps:
• Drive configuration
• Mounting
• Informing the computer about your drive and how you want it
• Mounting
• Informing the computer about your drive and how you want it
divided into partitions.
Before you physically mount your new disc drive in your com-
puter, you need to check the jumper plug settings that deter-
mine how the drive operates. Refer to Table 1 to find the Figure
specified applicable to your model drive for the particular con-
figuration functions of interest. Note that there are some con-
nector pins sticking out from the drive's printed circuit board
(PCB) that are labeled J2 and J6 (called "jumper plug head-
ers").
puter, you need to check the jumper plug settings that deter-
mine how the drive operates. Refer to Table 1 to find the Figure
specified applicable to your model drive for the particular con-
figuration functions of interest. Note that there are some con-
nector pins sticking out from the drive's printed circuit board
(PCB) that are labeled J2 and J6 (called "jumper plug head-
ers").
Model "W" additionally has J1-Auxiliary. Some systems may
have a cable connected to J1-Auxiliary that allows remote set-
ting of drive ID by switches or within the computer logic. It also
provides a connection to a remote drive activity LED. Jumpers
may be used on J1-Auxiliary.
have a cable connected to J1-Auxiliary that allows remote set-
ting of drive ID by switches or within the computer logic. It also
provides a connection to a remote drive activity LED. Jumpers
may be used on J1-Auxiliary.
Note the small jumper plugs connected across pairs of pins in
some places on these connectors (Figures 3a through 3e show
these jumper plugs enlarged).
some places on these connectors (Figures 3a through 3e show
these jumper plugs enlarged).