Fujitsu MAG3182FC Benutzerhandbuch
C141-E078-02EN
4 - 12
4.3.2
Interface connector
The connector for the fibre channel loop bus is an unshielded SCA-2 connector conforming to
SCSI-3 type which has two 20-pin rows spaced 1.27 mm (0.05 inch) apart. Figure 4.12 shows the
fibre channel connector. See Section C.5 in Appendix C for signal assignments on the connector.
SCSI-3 type which has two 20-pin rows spaced 1.27 mm (0.05 inch) apart. Figure 4.12 shows the
fibre channel connector. See Section C.5 in Appendix C for signal assignments on the connector.
For details on the physical/electrical requirements of the interface signals, refer to Sections 1
Interface Specifications.
Interface Specifications.
Figure 4.12 SCA2 type interface connector
4.3.3
Recommended components for connection
Applicable model
Name
Par number
Manufacturer
MAF3364FC
MAG series
MAG series
Interface connector
(CN1)
(CN1)
Connector
787317-1
AMP
ESD contact