Addonics Technologies JCEDIU192 Benutzerhandbuch
Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0
7
Chapter 4
Jumper settings inside the Jupiter Cipher ExDrive Drive Case
Jumper settings inside the Jupiter Cipher ExDrive Drive Case
A. If the Jupiter Cipher ExDri ve will be used externally with the external AC
adapter, the switch from the case must be switch to the right, labeled EXT
to grab power from external power supply.
to grab power from external power supply.
Application: Jupiter Cipher ExDrive can be set to receive power EXT and be
used with all three types of USIB cables.
used with all three types of USIB cables.
B. If the Jupiter Cipher ExDrive will be used externally without the external
AC adapter, the switch from the case must be switch to the left, labeled
INT to grab power from system.
INT to grab power from system.
Application: Jupiter Cipher ExDrive can be set to receive power INT and be
used with the following types of USIB cables: USB2.0 USIB & Firewire USIB
used with the following types of USIB cables: USB2.0 USIB & Firewire USIB
Note:
We recommend setting the hard dr ive to MASTER mode/setting at all
times. (Default setting)
J4 Pin Definition for Master Setting
J1 Pin Definition for USIB Interface
Hard Drive Brand
Master Setting
Hitachi
NEC
Fujitsu
Toshiba
NEC
Fujitsu
Toshiba
Pin 1~6 Open
Seagate
Pin 3 - Pin 4 Short
Hard Drive Setting
J1 Jumper Setting
Master
Pin 3 - Pin 5 Short