Xerox 144 Benutzerhandbuch

Xerox Nuvera

 100/120/144 EA Digital Production System - Customer Expectations Document

 

- 5 -

 

 

The purpose of this document is to help you understand the current features and capabilities of the Xerox 
Nuvera

 100/120/144 EA Digital Production System (DPS).  Review of this material is recommended prior 

to your signing an order for a Xerox Nuvera

 100/120/144 EA Digital Production System. 

This document addresses high-level expectations.  Additional details are provided in the training 
documentation.  

The Xerox Nuvera

 100/120/144 EA Digital Production System sets a new benchmark in the world of on-

demand printing.  It is a networked printing system comprised of multiple modules.  The Xerox FreeFlow™ 
Document Services Platform (FreeFlow™ DocuSP®) is integrated into the Printer Module.  The printer 
module may be acquired with simplex, letter size / A4 speeds of 100, 120 or 144 impressions per minute.  
The optional Scanner Module with 300 sheet input tray scans at 120 images per minute, simplex or duplex 
at 600 x 600 dpi.  Two Sheet Feed Modules (SFM's) are available, one with 4 trays, the other with 2 trays 
having more large-format capacity.  A SFM may also be installed after the printer module and used as an 
inserter.  The Printer module prints at 4800 x 600 dpi utilizing a state of the art dual beam laser raster 
output scanner (ROS) with dedicated image processing hardware.  The Finishing Transport Module (FTM) 
provides the capability to interface with a variety of production inline document finishing architecture (DFA) 
finishing devices.  The Basic Finishing Module (BFM) stacks and provides stapling in single or dual 
positions.  Up to two BFM modules (one a BFM Plus) can be used to enable continuous running with 
unload while run capability.  A BFM Plus module can also be used in tandem with the FTM to enable inline 
DFA finishing.  The Xerox Nuvera

 EA DPS, with the above production finishing options, has a wide range 

of paper latitude, including coated stocks.  Alternatively, the 100 and 120 ppm versions of the Xerox 
Nuvera

 EA DPS can also be used with a Mutifunction Finisher module, providing flexible mid-range 

finishing options.   

The Xerox Nuvera

 100/120/144 EA Digital Production System is a “clean-sheet” design utilizing innovative 

technologies.  It is the new base platform for Xerox monochrome products.   
The following expectations should be explicitly set.  Please see the appropriate section of this CED for 
further detail.   
 

The Xerox Nuvera

 100/120/144 EA Digital Production System will be available on a monthly average 

92 – 95%of the time. 

• 

Availability is defined as all of the time the machine is not being serviced, or waiting for service. 

• 

Given similar service coverage, DocuTech® / DocuPrint® availability averages up to 95%. 

 

•  Approved stocks can be found in the Compatible Media List in this document 

•  Reinforced stocks should be limited to 90 sheets loaded in a tray at one time 

•  The system performs more reliably with long grain paper 

•  Windowed stocks are not supported – performance (jams) maybe degraded. 
 

•  Envelopes 

Envelopes should be limited to 60 loaded in a tray at one time.  Nuvera

 feeder trays feed until 

almost empty but not until empty, leaving 20~40 sheets remaining.  When running envelopes 
frequent reloading of the feeder trays will be required. 
Very slight wrinkles (1/2 inch long) may occur on the trail edge of envelopes at the corners.