Sony SF-10000 Benutzerhandbuch

Seite von 382
Inserting regions based on rapid sound attacks 
1.  
Open the Fill.pca file. 
2.  
From the Tools menu, choose Auto Region. The Auto Region dialog appears. 
3.  
Clear the Build regions using the current tempo check box if it is selected. 
4.  
Specify a preset from the Preset drop-down list or configure a new setting using the dialog’s active parameters shown in the table 
below. 
Parameter 
Description 
Attack sensitivity 
Determines the sensitivity of the attack-detection algorithm to rapid volume 
increases. 
Release sensitivity 
Determines the minimum decrease in sound level required to create a region end 
point. 
Minimum level 
Determines the threshold audio level required to create a new region. 
Minimum beat duration 
Specifies the minimum length, in seconds, that must elapse before a new region can 
be created. 
Use release point for end of 
Requires a region end when the sound level drops by the factor specified by the 
region 
Release sensitivity value. 
5.  
Click OK. Regions are inserted in the audio file based on the dialog parameters. 
Note: 
All regions created using the Auto Region tool are automatically added to the Regions List and Playlist. 
Inserting regions based on musical time intervals 
When you select the Build regions using the current tempo check box in the Auto Region dialog (Tools Auto Region), regions are 
inserted according to the current beats per minute setting. You can change a file’s tempo information (including the measures, beats, 
and beats per minute settings) by choosing Status Format and then Edit Tempo from the Options menu. For more information, see 
1.  
Open the Musicbed.pca file. This file is located in the same folder as the application. 
2.  
From the Tools menu, choose Auto Region. The Auto Region dialog appears. 
3.  
Select the Build regions using the current tempo check box. 
4.  
Enter desired values in the Measures and Beats boxes: 
•  
To create a region on every beat, set Measures to 0 and Beats to 1. 
•  
To create a region at every measure, set Measures to 1 and Beats to 0. 
5.  
Click OK. Regions are created in the data window based on the Measures value, the Beats values, and the current beats per minute 
setting. 
USING MARKERS, REGIONS, AND THE PLAYLIST/CUTLIST 
123