Symantec 5 Benutzerhandbuch
To install and configure Ethernet cards for private network
1
Shut down VCS on Node A.
#
hastop -local
2
Shut down the node to get to the
OK
prompt:
#
shutdown -r now
3
Install the Ethernet card on Node A.
If you want to use aggregated interface to set up private network, configure
aggregated interface.
aggregated interface.
4
Install the Ethernet card on Node B.
If you want to use aggregated interface to set up private network, configure
aggregated interface.
aggregated interface.
5
Configure the Ethernet card on both nodes.
6
Make the two Ethernet cable connections from Node A to Node B for the
private networks.
private networks.
7
Restart the nodes.
Configuring the shared storage
Make the connection to shared storage from Node B. Configure VxVM on Node B
and reboot the node when you are prompted.
and reboot the node when you are prompted.
See
on page 46.
Bringing up the existing node
Bring up the node.
To bring up the node
1
Restart Node A.
2
Log in as superuser.
3
Make the VCS configuration writable.
#
haconf -makerw
4
Display the service groups currently configured.
#
hagrp -list
145
Installing VCS on a single node
Adding a node to a single-node cluster