Wyse Technology Z90D7p Benutzerhandbuch

Chapter 2

This section contains general troubleshooting information.

Due to different manufacturing processes on USB keys (and the variety of them), not all 
brands have been tested with the Wyse USB Firmware Tool. If you experience problems 
booting from a configured USB key, it is recommended that you try a different brand of 
USB key. 

Problem: How can I properly use a SanDisk Cruiser flash drive to image supported 
devices using the Wyse USB Firmware Tool? (KB17735)

Solution: SanDisk flash drives come with support for U3 (for details on U3, see

). When you initially use these drives, you are prompted to select the 

use for the drive: Apps and Storage or only Storage. If you select the Apps and Storage 
option, the drive will create two partitions, one of which is identified as a CD and is a read 
only partition. This partition sometimes prevents the Wyse USB Firmware Tool to properly 
prepare the USB key for imaging a device. To resolve this problem you can do one of the 
following:

•

Go  to 

, search in the SanDisk Knowledge Base for document 

2550, and then follow the instructions in the documentation.

•

Go  to 

, select USB Flash 

Drives from the Select Product Type list, click Find Driver, select U3 LaunchPad 
Remover, click Continue, and then download and use the U3 Launchpad Remover 
according to the instructions.