Lynx R FR 5011 Benutzerhandbuch
Reference Manual R FR 5010 Version1.4
Page 21
LAN Connection
This is a standard RJ48 connection and is used to
provide standard TCP/IP network control
connectivity into a control system. To be
connectivity into a control system. To be
operational this port requires the R CT 5030 Master
Controller is fitted to the rack. Please see the
reference manual for the R CT 5030 for more details
reference manual for the R CT 5030 for more details
on the use of this connection
External Sync Connection
An external sync reference (loop through
connection) can be connected for the rack. This
provides a common genlock reference for the
modules installed in the chassis. Sync signal can be
modules installed in the chassis. Sync signal can be
black or composite analog sync NTSC or PAL. This is
to provide a common reference to all modules
installed in the rack and can simplify the distribution
installed in the rack and can simplify the distribution
of the reference signal in some system applications.
1
5
6
9
Figure 8. Control Connector