DCS 1.0x Benutzerhandbuch
dCS Verona User Manual
Manual for Software Issue 1.0x
dCS Ltd
September 2004
Manual filename: Verona Manual v1.0x.doc
Page 21
email: more@dcsltd.co.uk
English version
web-site: www.dcsltd.co.uk
Dither
Button
(
Step
)
do this:
Press this button to turn the dither on or off. The
DITH
indicator lights if dither is
being added.
The
Dither
button doubles as the Menu
Step
button, used for paging forwards
through the Menu (see page
Status
Indicator
x
This consists of 3 indicators:
•
PWR
is lit when power is connected and the unit is turned on or is in
standby mode.
•
STBY
is lit when the unit is in standby mode.
•
OK
lights about 30 minutes after powering up, to indicate that the crystal
oscillators have fully settled. The unit is usable one minute after powering
up.
up.
Remote Control Sensor
x
Remote Control operation is not supported in this release.
Main Display
x
The main display tells you what Verona is doing.
In normal use, the unit displays either
44.1kHz
or
48kHz
.
While locking to an external reference the display shows
Locking
. When
locked, the unit displays either
44.1kHz
or
48kHz
.
When accessing the Menu (see page
), menu options are displayed here.
If an error occurs during power up or normal use, the details of the fault will be
displayed. See “Fault Indication” on page
displayed. See “Fault Indication” on page
Mode
Indicator
x
The
DITH
indicator lights to show that dither is being added to the outputs.
The
EXT
indicator lights when the unit is locked to an external reference
connected to the
EXT REF IN
connector. The external reference over-rides the
internal crystal oscillators.
Menu
Button
(
Select
)
Press the
Menu
button to open the Menu (see page
) and change or
Select
settings in the menu.