Gigabyte GA-7VA Benutzerhandbuch
- 22 -
GA-7VA Motherboard
English
7) PWR_LED
PWR_LED is connect with the system power indicator to indicate whether the system is on/off. It
will blink when the system enters suspend mode. If you use dual color LED, power LED will turn
to another color.
will blink when the system enters suspend mode. If you use dual color LED, power LED will turn
to another color.
1
Pin No. Definition
1
MPD+
2
MPD-
3
MPD-
1
HD+
SPK-
19
HD-
SPK+
20
2
1
1
Speaker
Connector
Soft Power
Connector
1
1
1
MSG+
MSG-
Message LED/Power/
Sleep LED
PW-
PW+
IDE Hard Disk
Active LED
RES+
RES-
Reset Switch
NC
8) F_PANEL (2x10 pins connector)
Please connect the power LED, PC peaker, reset switch and power switch etc of your
chassis front panel to the F_PANEL connector according to the pin assignment above.
chassis front panel to the F_PANEL connector according to the pin assignment above.
HD (IDE Hard Disk Active LED)
Pin 1: LED anode(+)
(Blue)
Pin 2: LED cathode(-)
SPK (Speaker Connector)
Pin 1: VCC(+)
(Amber)
Pin 2- Pin 3: NC
Pin 4: Data(-)
RES (Reset Switch)
Open: Normal Operation
(Green)
Close: Reset Hardware System
PW (Soft Power Connector)
Open: Normal Operation
(Red)
Close: Power On/Off
MSG(Message LED/Power/
Pin 1: LED anode(+)
Sleep LED)(Yellow)
Pin 2: LED cathode(-)
NC( Purple)
NC