Epson 9840 Benutzerhandbuch

If the Print option is purchased, the Print Button can be used to either print data or 
to freeze the display.  If the Hold option is purchased, the functionality of the 
button is set using the System Setup options.  Otherwise, the button can only 
control the ability to print data. 

In Run Mode, if the System Setup Options Print/Hold button is set to Hold, the 
Print button will freeze and unfreeze the run mode numerical display.  Press once 
to freeze the display at the current value.  Press again to return display to actual 
reading from sensor.  See Setup Mode information for the use of the Esc button 
during setup. 
 
If the Print button is set to Print, it will send a set of data to the printer.  This will 
contain the current readings of load, peak, valley, position, velocity, and limit 
status.  The units used for printing will be the units last selected on the numerical 
display. 
 
The printer must be a serial printer that supports ESC/P protocol.  Many Epson 
printers with serial ports are known to be compatible. 
 
Appendix B gives the pin assignments on the serial connector. 

The Unit button cycles through the list of units that are available for the item that is 
currently being displayed.   

M O D E L   9 8 4 0                                                                                                                                                          P G   1 2  

P U B .

2 8 5 6 - 1 6