Gateway FPD2275W Benutzerhandbuch
www.gateway.com
25
Picture has shadows or “ghosts”
•
Press (Menu), then
(Auto) to automatically adjust the display image to the
ideal settings.
•
Remove any extension cables or switchboxes.
•
Make sure that the video cable is connected securely to the back of the monitor and your
computer. For more information about connecting the video cable,
computer. For more information about connecting the video cable,
.
•
Make sure that the video cable is not damaged.
•
Check the end of the video cable for any pins that might be bent or pushed in.
•
Make sure that your monitor connection is using the VGA cable that came with your
monitor.
monitor.
Color is not uniform
•
Press (Menu), then
(Auto) to automatically adjust the display image to the
ideal settings.
•
Make sure that the monitor warms up for at least 30 minutes before making a final
judgment about color uniformity or brightness.
judgment about color uniformity or brightness.
Image is not sized or centered correctly
•
Press (Menu), then
(Auto) to automatically adjust the display image to the
ideal settings.
•
Use the position controls to adjust the image. For instructions on how to adjust the display
image position,
image position,
The monitor has pixels that are always dark or too bright
•
This condition is normal and inherent in the TFT technology used in active-matrix LCD
screens. Gateway’s inspection standards keep these to a minimum. If you feel these pixels
are unacceptably numerous or dense on your display, contact Gateway Customer Care to
identify whether a repair or replacement is justified based on the number of pixels affected.
screens. Gateway’s inspection standards keep these to a minimum. If you feel these pixels
are unacceptably numerous or dense on your display, contact Gateway Customer Care to
identify whether a repair or replacement is justified based on the number of pixels affected.
Speaker bar does not work
I installed the speaker bar, but no sound is coming out of the speakers.
•
Make sure that the speaker bar power cord is plugged into a USB port on the back of your
computer.
computer.
•
Make sure that the volume control knob on the front of the speaker bar is turned on. Turn
the knob clockwise to turn on the speakers and increase the volume. Turn the knob
counter-clockwise to decrease the volume and turn off the speakers. The speaker bar’s
power indicator lights blue when power is connected and the speakers are turned on.
the knob clockwise to turn on the speakers and increase the volume. Turn the knob
counter-clockwise to decrease the volume and turn off the speakers. The speaker bar’s
power indicator lights blue when power is connected and the speakers are turned on.
I checked all the connections and the speaker volume control is on, but I still do not get any
sound.
sound.
•
Your headphone/speaker jack may have been muted using Windows sound controls. To
check your headphone/speaker mute settings, click the speaker icon in the Windows
taskbar, or click Start, Control Panel, Sounds and Audio Devices, the Volume tab, then
click Advanced. For optimum volume control using the speaker bar, we recommend that
you set the Windows volume mid-way between the lowest and highest setting.
check your headphone/speaker mute settings, click the speaker icon in the Windows
taskbar, or click Start, Control Panel, Sounds and Audio Devices, the Volume tab, then
click Advanced. For optimum volume control using the speaker bar, we recommend that
you set the Windows volume mid-way between the lowest and highest setting.
I want to plug in my headphones, but there is a headphone jack on both sides of the speaker
bar. Which should I use?
bar. Which should I use?
•
You can use either jack or both jacks at the same time.
8512088.book Page 25 Friday, January 12, 2007 3:31 PM