GE v6 Benutzerhandbuch

 

Secure Perfect 6.1.1 User Manual 

 

160 

 

This dialog box allows you to add or edit the link between an event and an alarm group. The event 
determines when the alarm changes to the selected alarm group. 
Event: Click the drop-down list to display available events from which to select. 
New Group: Click the drop-down list to display available alarm groups from which to select.  
 

Click this graphic to open the 

 and edit the settings for the selected micro: 

  

 

Event: Select an event from the drop-down list. If there are no events listed, you will need to configure 
events using the 

New time: Select or enter a sense time. The value is in seconds and indicates the delay before triggering 
an associated digital output or sending in a Secure Perfect alarm if the DI type is Alarm. This number tells 
the system how many seconds to wait after sensing the input has changed to Active State. Enter 

00

 to 

immediately send the transaction to the host, notifying the host of a state change. Increase the Sense 
Time entry if using noisy or chattering contacts.  
Example: This value could indicate the delay time, in seconds, that elapses between the time a door 
contact is broken and the time the output and alarm are triggered. If door contact is closed before the 
sense time elapses, the alarm would not come in to Secure Perfect and the output would not activate. 
 

Device Menu 
The Elevator option opens the Elevator Form that allows you to configure elevator control records. 
 

This window displays when you click Assign Elevators, enabling you to select and assign an elevator 
association for this form. Only elevators in the operators’ facilities are available for assignment by this 
operator. 

• 

Select, and then click the right arrow to assign an available elevator.  

• 

Select, and then click the left arrow to unassign an elevator. 

The elevators that display in this list are those that are configured on the Elevator Form.