GE 68K System Benutzerhandbuch
68K System Monitor
User's Guide
User's Guide
GE Energy Services
General
SWM0023-1.00 -2
Full Release
3-47
PR - Profile
Platform
þ
CPM
þ
D20
D20 Base
D20 Base
þ
D20 ME
D20 Base
D20 Base
þ
D20/200
CCU Base
CCU Base
þ
D20/200 ME
CCU Base
CCU Base
þ
D25
Description
Use this command to display run-time statistics of all processes in the system,
including:
• the number of times the process was swapped in
• the number of system real-time clock ticks occurring during its run periods
• the average number of ticks (in tenths of a tick) per run (average)
• the CPU usage (in 10
including:
• the number of times the process was swapped in
• the number of system real-time clock ticks occurring during its run periods
• the average number of ticks (in tenths of a tick) per run (average)
• the CPU usage (in 10
ths
of percent) of the process
• the maximum period between watchdog process operations.
Note:
Each clock tick is one millisecond.
Syntax
Below is usage and syntax information for this command
Command Format
CPM / D20M pr / (p | r)
CCU / CCUME / D25 pr / (p | r | t)
Variables
/p
= print the process profile
/r
= reset process profile counts
/t
= print the process profile in the sequence of CPU
usage percentage
Parameters
None
Example
Type pr /r and press
ENTER
.
Results: The command resets the counts associated with
process profiling and watchdog run period.
The system displays any specified data and then
returns the prompt
returns the prompt
Continued on next page