Xilinx ML506 Benutzerhandbuch
Verify Factory Default Settings
•
Set the Ethernet PHY jumpers, J22, J23 to positions 1-2 (1)
•
Insert the Factory CompactFlash into the ML505 board (2)
•
Set the Front DIP switches (SW3) to 00010101 (1 = ON) (3)
•
Set the Rear DIP switches (SW6) to 11001010 (4)
•
Power-up the ML505 board
4
Note: Presentation applies to the ML505 and ML506
2
3
1