Bosch DVA-08K Benutzerhandbuch

RAID Subsystem DVA-08K | Installation Manual

Subsystem Maintenance | en 49 

Bosch Security Systems

F.01U.027.797 | V2 | 2008.08

7.

Insert the new PSU module into the subsystem: Once the previously removed cooling 

module has been installed, insert the new PSU module into the subsystem. Make sure the 

extraction lever is in its downright position so that the saddle notches on the lower edges 

of the handle can lock on to the edge metal brackets along the chassis inner walls. Push 

the PSU into the slot and pull the handle upwards to secure the module. 

8.

Reinsert the retention screw: If the PSU module is properly installed, the back end of the 

module should be aligned with the enclosure’s rear panel. To firmly secure the PSUs into 

place, reinsert the retention screw. 

9.

Reconnect the power cord and turn the power on: Plug the power cord into the socket on 

the PSU module and turn the PSU module power switch on.