Black Box Ethernet NIC Benutzerhandbuch

LH1350C Serial Fast Ethernet NICs

4

24-hour Technical Support:  1-724-746-5500

Bit error rate:

<10-9

Single mode fiber (recommended):

9 µm 

Multimode fiber (recommended):

62.5/125 µm 

Multimode fiber (optional):

100/140, 85/140, 50/125 µm

LH1350C-ST-R3, LH1350C-SC-R3 1300 nm multimode
Fiber optic transmitter power:

min: -19.0 dBm max: -14.0 dBm

Fiber optic receiver sensitivity:

min: -31.0 dBm max: -17.0 dBm

Link budget:

12.0 dBThe fiber optic transmitters 

The fiber-optic transmitters on the device meet Class I Laser safety requirements
per IEC-825/CDRH standard and compy with 21CRF1040.10 and 21CRF1040.11.

24-hour Technical Support:  1-724-746-5500

5

For models LH1350C-ST-R3, LH1350C-SC-R3

Standards:

IEEE 802.3

Expansion bus standard:

PCI 2.1,  2.2

Data rate

100Mbps fiber media

LED:

LINK/ACT (on the bracket)
ON = communication link; FLASHING = activity 
on link
FDX (full duplex link); ON = full duplex link

Drivers:

• NetWare Server 3.12, 4.x, 5.x; 6.x 
• Netware DOS Client ODI 
• Windows 95, 98, 2000, 2003, NT4.0, XP
• Linux

Boot server support:

Novell RPL Boot ROM; PXE Boot ROM 

Dimensions:

3.2”W  x 5.4”D x 0.9”H (80 mm x 138 mm x 23 
mm) 

Weight:

3 oz. (91g) approximate

Power consumption:

1.0A @ +5VDC 

MTBF

184,743 hours (Bellcore7 V5.0)

Opearting temp:

0°C to 50°C (32°F to 122°F)

Storage temp:

-25°C to 85°C (-13°C to 185°F)

Humidity:

5% to 90%, non-condensing 

Altitude:  

0 to 10,000 feet

Warranty:

Lifetime

WARNING: Visible and invisible laser radiation when open:  DO NOT stare into
the beam or view directly with optical instruments. Failure to observe this warning
could result in damage to your vision or blindness.

CAUTION: Use of controls, adjustments, or the performance of procedures other
than those specified herein may result in hazardous radiation exposure.

The information in this manual is subject to change without further notice.