Soyo SY-5EMA Benutzerhandbuch

After you have turned off your computer, clear the CMOS memory

by momentarily shorting pins 2-3 on jumper JP5, for a few seconds.

Then restore JP5 to the initial 1-2 jumper setting in order to recover

and retain the default settings.

Short pin 2-3 for
a few seconds to
clear the CMOS

Short pin 1-2
to retain new
settings

Note: You must unplug the ATX power cable from the ATX power
connector when performing the CMOS Clear operation.

Default settings for multi-I/O addresses are as follows:

378H

7

ECP + EPP

3F8H

4

2F8H

3

Warning: If a default I/O address conflicts with other I/O

cards such as sound card, you must change one of the I/O

addresses to remedy to this address conflict. (I/O addresses

can be adjusted from the BIOS Setup Utility)

3

2

1

3

2

1