Spectralink 1728 Benutzerhandbuch

24   

R

EFERENCE

 & I

NSTALLATION

 M

ANUAL

 

  

Sections [001] to [016] = Zones 1 to 16

Option [1] OFF = Auto Zone Shutdown Disabled 
Option [1] ON

= Auto Zone Shutdown Enabled for selected zone (default)

If, in a single armed period, the number of alarms generated by a zone with the Auto Zone Shutdown
option enabled exceeds the number defined by the Auto Zone Shutdown Counter, the control panel will no
longer generate an alarm for that zone. To program the Auto Zone Shutdown Counter, key in the desired
limit (000=Disabled, 001 to 015, Default = 5) into section [089]. The Auto Zone Shutdown Counter resets
every time the system is armed.

Sections [001] to [016] = Zones 1 to 16

Option [2] OFF = Bypass Zone Disabled 
Option [2] ON

= Selected Zone is Bypass Enabled (default)

When a user, utilizes the Bypass Programming feature (see page 53), only zones with the Bypass option
enabled can be programmed as bypassed.

Sections [001] to [016]: Zones 1 to 16

Option [3] OFF = Stay Zone Disabled (default)
Option [3] ON

= Selected Zone is Stay Enabled

Zones with the Stay option enabled will be bypassed when the system is Stay Armed (see page 52).

Sections [001] to [016]: Zones 1 to 16

[4] OFF / [5] OFF: Audible Steady (default) 
When the conditions for an alarm have been met, the control panel can transmit the appropriate Zone
Alarm report code (see page 34) and provides a steady output for any bells or sirens connected to the
control panel’s bell output. 

[4] OFF / [5] ON: Audible Pulsed Alarm
When the conditions for an alarm have been met, the control panel can transmit the appropriate Zone
Alarm report code (see page 34) and provides a pulsed output (see Figure 5-2 on page 22) for any bells or
sirens connected to the control panel’s bell output. 

[4] ON / [5] OFF: Silent Alarm 
When the conditions for an alarm are met, the control panel can transmit the appropriate Zone Alarm
report code (see page 34) and will not activate the control panel’s bell output. The appropriate 

ARM

 or

STATUS

 LED on the keypads will flash to indicate an alarm and the user will still have to disarm the system.

[4] ON / [5] ON: Report Only 
When the conditions for an alarm have been met, the control panel can transmit the appropriate Zone
Alarm report code (see page 34). The system will not have to be disarmed.

Sections [001] to [016]: Zones 1 to 16

Option [6] OFF = Intellizone Disabled (default)
Option [6] ON

= Intellizone Enabled for Selected Zone

This feature reduces the possibility of false alarms. When a zone with the Intellizone option opens, the
panel does not immediately generate an alarm. First it triggers the Intellizone Delay Timer. To program the
Intellizone Delay Timer, key in the desired 3-digit value (010 to 255 seconds, Default = 48 seconds) into
section [084]. If any of the following conditions occur during this period, the panel will generate an alarm:
• During the Intellizone Delay, a second zone has caused an alarm.
• During the Intellizone Delay, the zone in alarm has restored (closed) and re-occurred (opened).
• The zone in alarm remains open for the entire Intellizone Delay.