Texas Instruments TMDXEVM6472 Merkblatt

Seite von 2
TMS320C6472 Evaluation Module
Quick Setup Guide
TMDXEVM6472
Getting Started:
The EVMC6472 ships with a Power On self Test (POST) flashed 
in to I2C EEPROM. The POST will be automatically executed 
when the board is powered ON. POST will perform memory 
test and EMAC internal loopback test. At 'power on' state the 
user LEDs will glow. The LEDs will continue to glow while the 
POST utility is being copied from EEPROM to IRAM. User LEDs 
will turn OFF once the POST is copied to IRAM. 
User LED-1 and user LED-2 will blink to indicate successful 
executions of memory and EMAC internal loopback tests 
respectively. These LEDs will turn OFF after completion of the 
tests.
Please refer EVM User Guide for software installation and 
other details.
  
Helpful Hints:
•   Plug in all the cables before turning the EVM ON to 
     ensure proper grounding.
•  Do not unnecessarily flex the boards, while inserting 
     cables. Excessive flexing can break the PCB traces.
Online Documentation
Most of the information on EVM6472 is available online. Some 
of the most commonly used resources are mentioned below:
EVM6472 Information:
http://www.einfochips.com/TI-TMS320C6472-EVM.php
This link contains:
•   Hardware & software details
•   User Guide
•   Technical Reference Manual
•   TMS320C6472 Datasheet
•   Frequently Asked Questions (FAQ)
C6472 DSP Information:
http://focus.ti.com/docs/prod/folders/print/tms320c6472.html
TI Worldwide Technical Support 
Internet
TI Semiconductor Product Information Center Home Page 
support.ti.com
TI Semiconductor KnowledgeBase Home page 
support.ti.com/sc/knowledgebase
Product Information Centers
Americas
Phone                 +1(972) 644-5580             Fax         +1(972)927-6377
Internet/Email    support.ti.com/sc/pic/americas.htm    
Europe, Middle East and Africa
Phone
  European Free Call        00800-ASK-TEXAS
                                           (00800 275 83927)
  International                   +49 (0) 8161 80 2121
  Russian Support              +7 495 981 0701         
                                 
Note: The European Free Call (Toll Free) number is not active in all 
countries. If you have technical difficulty calling the free call 
number, please use the international number above. 
  Fax                 
           +(49) (0) 8161 80 2045
  Internet                            support.ti.com/sc/pic/euro.htm
Japan
Fax
   International    +81-3-3344-5317           Domestic       0120-81-0036
Internet/Email
   International    support.ti.com/sc/pic/japan.htm
   Domestic          www.tij.co.jp/pic
Asia
Phone
   International
     Domestic        Toll-Free-Number                             Toll-Free-Number
     Australia
Malaysia
     China
New Zealand
     Hong Kong
Philippines
     India
Singapore
     Indonesia
Taiwan
     Korea
Thailand
Fax                      
Email                    tiasia@ti.com
                                                                                          ti-china@ti.com
Internet               support.ti.com/sc/pic/asia.htm
       
Important Notice: The products and services of Texas Instruments 
Incorporated and its subsidiaries described herein are sold subject to TI's 
standard terms and conditions of sale. Customers are advised to obtain the 
most current and complete information about TI products and services 
before placing orders. TI assumes no liability for applications assistance, 
customer's applications or product designs, software performance, or 
infringement of patents. The publication of information regarding any other 
company's products or services does not constitute TI's approval, warranty or 
endorsement thereof.
The floating bar is a trademark of Texas Instruments. 
All other trademarks are the property of their respective owners
©2009 Texas Instruments Incorporated
eInfochips Literature: EVM6472_QSG_0.2
+91-80-413816651-
800-999-084
800-820-8682
800-96-5941
1-800-425-7888
001-803-8861-1006
080-551-2804
+886-2-2378-6808
1-800-80-3973
0800-446-934
1-800-765-7404
800-886-1028
0800-006800
 001-800-886-0010
Dual Giga Ethernet
Boot Mode/Configuration
Settings
RS232-
Serial
USB mini-B
C6472
(6 Core DSP)
HPI - DC
LEDs-I2C
AMC-
Type B+
Cold
Reset
On-Board
Embedded
Emulation
Warm
Reset
JTAG-
FPGA
NAND Flash
128 MB
User
Switches
User
LEDs
FPGA
JTAG-DSP
DDR2 RAM
256 MB
12V DC
w w w . e i n f o c h i p s . c o m