Tyan Computer B5103G12S2 Benutzerhandbuch

http://www.TYAN.com 

4.  Attach a post slide mount adapter to the front end of the outer slide by securing 2 

sets of hex screws and hex nuts together. 

 

5.  Attach a post slide mount adapter to the rear end by moving the inner rails to expose 

the screw holes. Do the same for the other outer slide. 

 

6.  Attach the newly assembled outer slide with the post slide mount adapters to the 

front and rear corners of the rack that you will use to place the system chassis by 
securing only the first and last screw holes (dark-colored screws), omitting the 
middle screw hole. Do the same for the other side. 

 

Cabinet into the Rack 

Slide system cabinet Œ with the inner slides previously installed into the inner rails of 
the outer slides attached to the rack and press on the release latch • until the front panel 
is aligned with the front edge of the rack.