IBM XSERIES 220 Benutzerhandbuch

Seite von 178
 168
Hardware Maintenance Manual: xSeries 220
 
 
Problem determination tips
Due to the variety of hardware and software combinations that can be encountered, 
use the following information to assist you in problem determination.  If possible, 
have this information available when requesting assistance from Service Support and 
Engineering functions.
Machine type and model
Processor or hard disk upgrades
Failure symptom 
— Do diagnostics fail?
— What, when, where, single, or multiple systems?
— Is the failure repeatable?
— Has this configuration ever worked?
— If it has been working, what changes were made prior to it failing?
— Is this the original reported failure?
Reference/Diagnostics version 
— Type and version level
Hardware configuration 
— Print (print screen) configuration currently in use
— BIOS  level
Operating system software 
— Type and version level
Note:
 To eliminate confusion, identical systems are considered identical only if they: 
1.
Are the exact machine type and models
2.
Have the same BIOS level
3.
Have the same adapters/attachments in the same locations
4.
Have the same address jumpers/terminators/cabling
5.
Have the same software versions and levels
6.
Have the same Reference/Diagnostics Diskette (version)
7.
Have the same configuration options set in the system
8.
Have the same setup for the operation system control files
 
Comparing the configuration and software set-up between "working and non-
working" systems will often lead to problem resolution.
Notices
References in this publication to IBM products, programs, or services do not imply 
that IBM intends to make these available in all countries in which IBM operates.  Any 
reference to an IBM product, program, or service is not intended to state or imply that 
only that IBM product, program, or service may be used.  Subject to IBM’s valid 
intellectual property or other legally protectable rights, any functionally equivalent 
product, program, or service may be used instead of the IBM product, program, or 
service.  The evaluation and verification of operation in conjunction with other 
products, except those expressly designated by IBM, are the responsibility of the user.