Intel PX875P Benutzerhandbuch

 
 

 

 

36 

 

This field determines the operating mode of the SATA ports. The options are determined by the 
“On-Chip Serial ATA” field. 

On-Chip Serial ATA – Combined Mode: 

When you set the “On-Chip Serial ATA” to “Combined Mode”, you must select one of the PATA 
channels to use with the SATA devices. 

Options: Primary Master, Primary Slave, Secondary Master, Secondary Slave 

On-Chip Serial ATA – Enhanced Mode:   

When you set the “On-Chip Serial ATA” to “Enhanced Mode”, you must determine which of the 
SATA devices will be the master SATA device. You configure this with the “Serial ATA Port 0 
Mode” field only. 

Options: SATA0 master, SATA1 master 

 

If you highlight the “INTEL OnChip PCI Device” label and then press the enter key, it will take you 
to a submenu with the following options: 

his option should be enabled if your system has a USB port installed on the system board. You will 

eed to disable this feature if you add a higher performance controller.   

abled  

his option should be enabled if your system has a USB 2.0 device installed on the system board. 

if you install a USB 1.1 device. 

d 

ptions: Auto (default)、Disabled 

 or disable the LAN Device. Options: Enabled (default)、Disabled 

 

 

T
n

Options: Enabled (default)、Dis

 

T
You will need to disable this feature 

le

Options: Enabled (default)、Disab

 

Enables support for USB attached keyboards. Options: Auto (default)、Enabled 

 

This item allows you to control the onboard AC’97 audio. O

 

This item allows you to enable