Intel PT800DB Benutzerhandbuch

 
 
                                                                                                                                                                                                                                                                                                                                                             

 

 

This determines the manner in which the monitor is blanked. 

DPMS (default) 

Initial display power management signaling. 

Blank Screen 

This option only writes blanks to the video buffer. 

V/H SYNC+Blank  This selection will cause the system to turn off the vertical and 

horizontal synchronization ports and write blanks to the video buffer. 

This determines the IRQ in which the MODEM can use. 

The settings are: 3, 4, 5, 7, 9, 10, 11, NA. 

Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off state.   

The settings are: Delay 4 Sec, Instant-Off. 

This item allows the system power ON/OFF automatic when power loss and recovery again, you 

can choose Auto for recovery pre-state, or always ON/OFF after power recovery.   

Please refer to section 3-8-1 

 

 

 

↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit  F1:General Help 

During Disabled, the system will ignore any incoming call from the modem. During Enabled, the 

system will boot up if there’s an incoming call from the modem.