Intel AIMB-253 Benutzerhandbuch
17
Chapter 2 Hardware Setup
2.6.6
Fan Power Connectors: CPUFAN1, SYSFAN1
The fan power connectors support system cooling fan with +12V. When
connecting the wire to the connectors, always take note that the red wire
is the positive and should be connected to the +12V, the black wire is
Ground and should be connected to GND. If the mainboard has a System
Hardware Monitor chipset on-board, you must use a specially designed
fan with speed sensor to take advantage of the CPU fan control.
connecting the wire to the connectors, always take note that the red wire
is the positive and should be connected to the +12V, the black wire is
Ground and should be connected to GND. If the mainboard has a System
Hardware Monitor chipset on-board, you must use a specially designed
fan with speed sensor to take advantage of the CPU fan control.
Figure 2.9: Fan Power Connectors: CPUFAN1, SYSFAN1
Note
Please refer to the recommended CPU fans at Intel® / AMD®
official website or consult the vendors for proper CPU cooling
fan.
official website or consult the vendors for proper CPU cooling
fan.
CPUFAN1
SENSOR
+12V
GND
SYSFAN1
SENSOR
+12V
GND