Fujitsu OCe10102 10Gb/s 2-port CNA S26361-F3592-L2 Datenbogen
Produktcode
S26361-F3592-L2
Data Sheet
Fujitsu Converged Network Adapter
Page 1 / 4
http://ts.fujitsu.com/Primergy
Data Sheet
Fujitsu Converged Network Adapter
OCe10102-F dual port 10Gbit Ethernet Controller PCIe x8 based on Emulex OCe10102
Main Features
Benefits
DCB convergence with high-performance FCoE protocol offload
Leverages ten generations of advanced, field-proven Fibre Channel
technology
Superior network support with TCIP/IP and TCP Chimney offloads
One infrastructure for network and storage reduces CapEx
Easy to deploy and manage with the OneCommand™ Manager
application
Industry-leading performance per watt reduces OpEx
Enterprise-ready with hardware parity, CRC, ECC and other advanced
error checking
Protocol offloads support Emulex VEngine™ technology to enable
more virtual machines per server
One management console for network and storage, integrated
management of UCNAs and HBAs
Easy to deploy and manage with the OneCommand Manager
application
A Converged Network Adapter (CNA) is a Network
Adapter that supports both the Ethernet and Fibre
Channel standards. It provides 10 Gb connectivity
to Ethernet networks and also connects to Fibre
Channel storage area networks (SANs) using Fibre
Channel over Ethernet (FCoE) and Data Center
Bridging (DCB). The adapter consolidates Ethernet
and FC traffic, reducing the number of cables and
adapters needed for a server. The CNA provides 2
independent physical functions per channel which
can both be used at the same time for FC and
Ethernet. Each port of the device provides separate
NIC and HBA functions to the operating system or
hypervisor. FC and network traffic are transmitted
simultaneously over a common cable to a DCB-
enabled switch which segregates Ethernet and
Fibre Channel I/O to the appropriate network.
Adapter that supports both the Ethernet and Fibre
Channel standards. It provides 10 Gb connectivity
to Ethernet networks and also connects to Fibre
Channel storage area networks (SANs) using Fibre
Channel over Ethernet (FCoE) and Data Center
Bridging (DCB). The adapter consolidates Ethernet
and FC traffic, reducing the number of cables and
adapters needed for a server. The CNA provides 2
independent physical functions per channel which
can both be used at the same time for FC and
Ethernet. Each port of the device provides separate
NIC and HBA functions to the operating system or
hypervisor. FC and network traffic are transmitted
simultaneously over a common cable to a DCB-
enabled switch which segregates Ethernet and
Fibre Channel I/O to the appropriate network.
Converged Network Adapter
As a member of the Emulex OneConnect Universal
CNA family, the OCe10102-F uses a 10Gbps
DCB or Enhanced Ethernet infrastructure for
networking and storage, reducing capital expense
CNA family, the OCe10102-F uses a 10Gbps
DCB or Enhanced Ethernet infrastructure for
networking and storage, reducing capital expense
(CapEx) for adapters, switches and cables, and
operational expense (OpEx) for power, cooling and
IT administration. The OneConnect OCe10102-F
supports protocol offloads for FCoE, TCP/IP and TCP
Chimney to provide maximum bandwidth with
minimum use of CPU resources. For virtualized
server deployments, OneConnect protocol offloads
enable more VMs per server, providing greater
cost saving to optimize return on investment. The
OneCommand™ Manager application provides
centralized management of Emulex One Connect
UCNAs and LightPulse® HBAs and CNAs throughout
the data center from a centralized management
console. The OneCommand Manager application
provides both, a graphical user interface (GUI) and
a scriptable command line user interface (CLI) to
optimize administration efficiency.
operational expense (OpEx) for power, cooling and
IT administration. The OneConnect OCe10102-F
supports protocol offloads for FCoE, TCP/IP and TCP
Chimney to provide maximum bandwidth with
minimum use of CPU resources. For virtualized
server deployments, OneConnect protocol offloads
enable more VMs per server, providing greater
cost saving to optimize return on investment. The
OneCommand™ Manager application provides
centralized management of Emulex One Connect
UCNAs and LightPulse® HBAs and CNAs throughout
the data center from a centralized management
console. The OneCommand Manager application
provides both, a graphical user interface (GUI) and
a scriptable command line user interface (CLI) to
optimize administration efficiency.