Panasonic AW-HHD870N Benutzerhandbuch

- 9 -



   Be sure to ask your store, where you purchased the 

product, for mounting.



   Disconnect the camera power connector before 

mounting.



   Before handling the card, touch a metal part of the 

camera to discharge the static from the human body. 
An anti-static wrist strap is recommended for added 
safety.  
If you touch the card while you are still charged with 
static, it may cause trouble.



   Keep the metal parts of the card free of contact with 

other metal parts.

1

   Switch the camera off, and disconnect the power 

connector and other cables from the camera.

2

   Loosen the four screws on the rear of the camera and 

remove the rear panel.

3

   Loosen the two screws for the option card slot and 

remove the cover.

4

   Insert the SDI card along the guide rail at the bottom of 

the camera and the tab above. Insert it securely all the 
way.

5

   Tighten the two card setscrews securely. 

If you have lost the screws, use the screws (6 mm long) 
supplied as accessories.

6

   Fasten the rear panel with the four screws. 

If you have lost the screws, use the screws (Black, 8 mm 
long) supplied as accessories.

7

   Plug the cables back as necessary, connect the power 

connector, then switch power on.