Siemens PCS7 Benutzerhandbuch
Product Information
PCS7/TM V2.02
24.10.2001
Siemens AG 2001
3 of 21
1 General Information
Scope of delivery
This CD contains the following components for PCS7-OS versions V4.02 and V5.2:
•
TELEPERM
M
channel
DLL
•
Image blocks in TELEPERM M NORA representation: PCS7/TM-OCX (NORA)
•
Image blocks in a representation similar PCS7: PCS7/TM_OCX (PCS7)
•
Documentation and product information in pdf format - see chapter 4
•
TELEPERM M tools such as „establish connection(*)“, ORPA import, block import, message gen-
erator
erator
•
Configuring tools TM_SmartTools including description (*)
(*) Only with version 5
The scope of delivery does not contain:
•
System software WinCC, V5.0/ SP2+HF7, or PCS7-OS, V5.2
•
Operating system Windows NT, 4.0, including Service Packs
2 What’s new ?
2.1 CD content in general
Starting the program Setup.exe in the root directory of the CD will identify the installed WinCC version
and branch to the corresponding version’s directory of the CD (PCS7_Version_4 or PCS7_Version_5).
For further information see chapter 3.3. If a valid version of WinCC cannot be identified the program
Setup.exe will be finished after a message box has been given out .
and branch to the corresponding version’s directory of the CD (PCS7_Version_4 or PCS7_Version_5).
For further information see chapter 3.3. If a valid version of WinCC cannot be identified the program
Setup.exe will be finished after a message box has been given out .
Under the directory PCS7_Version_5 you find in addition to the current version of the TELEPERM M
channel V2.02 also the older version V2.01 under the corresponding sub-directory.
channel V2.02 also the older version V2.01 under the corresponding sub-directory.
2.1.1 TM_SmartTools
With Version_5 so called TM_SmartTools are delivered which support the configuration. These pro-
grams are delivered free of charge and without commitment. They may be copied to any directory of
the hard disk, preferably <...>\Siemens\TM_Werkzeuge and initialised from there. A short description
of the tools is delivered under the corresponding directory of the CD.
grams are delivered free of charge and without commitment. They may be copied to any directory of
the hard disk, preferably <...>\Siemens\TM_Werkzeuge and initialised from there. A short description
of the tools is delivered under the corresponding directory of the CD.
2.2 TELEPERM M channel
It is mandatory to install the TELEPERM M channel after the installation of the components for PCS7
or WinCC. If WinCC is installed later the TELEPERM M channel has to been reinstalled again.
or WinCC. If WinCC is installed later the TELEPERM M channel has to been reinstalled again.
2.2.1
Modifications vs. Version V2.01
The following problems have been eliminated:
•
Acceleration of the Message Generator
Because of using a new function within WinCC the generating procedure could be accelerated.
Because of using a new function within WinCC the generating procedure could be accelerated.
The following new functions have been implemented:
With the current version V5.0/SP2 + HF7 WinCC delivers a new function concerning redundancy:
•
Switchover to the Master Server after CS 275 Coupling Start-up
When a server which is the master server for one or more multi-clients is activated these multi-
clients switch over to this master server not before the coupling start-up on the subsidiary AS is
When a server which is the master server for one or more multi-clients is activated these multi-
clients switch over to this master server not before the coupling start-up on the subsidiary AS is