DCS Digital to Digital Converter Benutzerhandbuch
dCS 974 User Manual
Manual for Software Version 1.0x
dCS Ltd
May 2001
Manual part no: DOC1241121A1
Page 17
Document No: OS-MA-A0124-112.1A1
Contact
dCS
on + 44 1799 531 999
email to: more@dcsltd.co.uk
(inside the UK replace + 44 with 0)
web site: www.dcsltd.co.uk
Setting the Output mode
do this:
Scroll down the
Sample Rate Conversion
menu to
Output Mode
and press
the
→
→
→
→
button. The cursor should be beside
Normal
Choose one of the settings
from the following list, scroll to it and press
Set
:
•
Normal
. The
Output Sample Rate
must not be higher than 96kS/s. Single
wire data will be available on all of the AES, SPDIF or SDIF-2 outputs.
•
Dual AES
. The
Output Sample Rate
must be 88.2, 96, 176.4 or 192kS/s.
Dual AES data will be available on the
AES 1
/
AES 2
output pair and the
AES 3
/
AES 4
output pair. Do not use the other outputs.
•
Quad AES
. The
Output Sample Rate
must be 176.4 or 192kS/s. Quad
AES data will be available on the
AES 1,
AES 2,
AES 3
and
AES 4
output
group. Do not use the other outputs.
•
DSD SDIF-2
. The input format must be
DSD,
DSD Quad
or PCM at
44.1kS/s or more. DSD SDIF-2 data will be available from the
DSD/SDIF
outputs (lower block) and DSD Quad data from the
AES 1,
AES 2,
AES 3
and
AES 4
output group. Do not use the other outputs.
•
DSD SDIF-3
. The input format must be
DSD,
DSD Quad
or PCM at
44.1kS/s or more. DSD SDIF-2 data will be available from the
DSD/SDIF
outputs (lower block) and DSD Quad data from the
AES 1,
AES 2,
AES 3
and
AES 4
output group. Do not use the other outputs.
do this:
Proceed to Step 4.