Fujitsu D1382 Benutzerhandbuch
Features
4 - English
A26361-D1382-Z120-1-7419
·
1 AGP slot
The AGP slot supports 4x AGP mode. Only AGP boards with 1.5 V are supported.
The AGP slot supports 4x AGP mode. Only AGP boards with 1.5 V are supported.
·
IDE hard disk controller connected to PCI bus for up to four IDE drives
(e.g. IDE hard disk drives, ATAPI CD-ROM drives)
The IDE hard disk controller are ATA100, ultra DMA capable and support PIO modes 0-4.
(e.g. IDE hard disk drives, ATAPI CD-ROM drives)
The IDE hard disk controller are ATA100, ultra DMA capable and support PIO modes 0-4.
·
Floppy disk drive controller (possible formats: 720 KB, 1.44 MB, 2.88 MB)
·
The system board supports booting from a 120 MB IDE floppy disk drive.
·
Real-time clock/calendar with integrated battery backup
·
4 internal USB ports (C / D and E / F)
·
1 internal serial port for chipcard reader (SmartCard reader).
·
1 external parallel port (ECP- and EPP-compatible)
·
1 external serial port (16C550 compatible with FIFO)
·
2 external PS/2 ports for keyboard and mouse
·
2 external USB ports (A / B)
External ports
2
3
1
4
5
6
7
8a
8c
8b
1 = PS/2 mouse port
2 = PS/2 keyboard port
3 = Serial port
4 = Parallel port
5 = VGA
6 = LAN connector
2 = PS/2 keyboard port
3 = Serial port
4 = Parallel port
5 = VGA
6 = LAN connector
7 = USB ports A and B
8a = Audio Line-Out
8a = Audio Line-Out
Headphones
8b = Audio Line-In
8c = Audio Micro-In
8c = Audio Micro-In
The components and connectors marked are not necessarily present on the system board.