Gigabyte GA-965GM-S2 Benutzerhandbuch

BIOS Setup

- 35 -

This feature allows your hard disk to report read/write errors and to issue warnings when third-
party hardware monitor utility is installed.

Enabled

Enable HDD S.M.A.R.T. capability.

Disabled

Disable HDD S.M.A.R.T. capability. (Default value)

Enabled

Enable CPU Hyper Threading Feature. Please note that this feature is only
working for operating system with multi processors mode supported.
(Default value)

Disabled

Disable CPU Hyper Threading.

Enabled

Limit CPUID Maximum value to 3 when use older OS like NT4.

Disabled

Disable CPUID Limit for windows XP. (Default value)

Enabled

Enable No-Execute Memory Protect function. (Default value)

Disabled

Disable No-Execute Memory Protect function.

Enabled

Enable CPU Enhanced Halt (C1E) function. (Default value)

Disabled

Disable CPU Enhanced Halt (C1E) function.

Enabled

Enable CPU Thermal Monitor 2 (TM2) function. (Default value)

Disabled

Disable CPU Thermal Monitor 2 (TM2) function.

Enabled

Enable CPU EIST function. (Default value)

Disabled

Disable EIST function.

Enabled

Enable Virtualization Technology. (Default value)

Disabled

Disable this function.

This feature allows you to select the first initiation of the monitor display from which card when you
install a PCI card and a PCI Express VGA card on the motherboard.

PEG

Set Init display first to PCI Express VGA card.

PCI

Set Init display first to PCI. (Default value)

Onboard

Set Init display first to Onboard VGA.

Enable If No Ext PEG

Output from the onboard GPU when no PCI Express VGA card is installed. (Default value)

Always Enable

Always output from the onboard GPU.

1MB

Set on-chip frame buffer size to 1MB.

8MB

Set on-chip frame buffer size to 8MB. (Default value)

(Note) This item will show up when you install a processor which supports this function.