Emerson ATCA-9305 Benutzerhandbuch
Management Processor Monitor:
MPC8548 Environment
9-27
The monitor supports optional environment variables that enable additional functionality.
The moninit command (see “moninit” on page 9-22) clears all environment variables and
sets the standard environment variables to the default values. All optional environment vari-
ables are removed after moninit. However, it can clear all optional variables.
The moninit command (see “moninit” on page 9-22) clears all environment variables and
sets the standard environment variables to the default values. All optional environment vari-
ables are removed after moninit. However, it can clear all optional variables.
eth1addr
00:80:F9:
98:00:00-
00:80:F9:
98:FF:FF
98:00:00-
00:80:F9:
98:FF:FF
ATCA-9305 board Ethernet address for TSEC_2 port, the last
digits are the board serial number in hex.
digits are the board serial number in hex.
fru_id
undefined
Corresponds to ATCA-9305 processing resources
Valid options: Not defined in default configuration—
reported at bootup from the IPMC
Valid options: Not defined in default configuration—
reported at bootup from the IPMC
gatewayip
0.0.0.0
Select the network gateway machine IP address
hostname
EMERSON
_ATCA-
9305
_ATCA-
9305
Target hostname
icache
on
Enables the processor L1 instruction cache
Valid options: on, off
Valid options: on, off
ipaddr
0.0.0.0
Board IP address
l2cache
on
Enables the L2 cache
Valid options: on, off
Valid options: on, off
loadaddr
0x100000
Define the address to download user application code (used
with TFTP)
with TFTP)
model
Board model number
ncip
undefined
Sets the IP address and the destination port, format is
<ip_addr>;<port>
<ip_addr>;<port>
netmask
0.0.0.0
Board sub-network mask
powerondiags
on
Turns POST diagnostics on or off after power-on/reset
Valid options: on, off
Valid options: on, off
preboot
undefined
Command to execute immediately before starting the
CONFIG_BOOTDELAY countdown and/or running the auto-
boot command entering the interactive mode
CONFIG_BOOTDELAY countdown and/or running the auto-
boot command entering the interactive mode
rootpath
eng/
emerson/
emerson/
Path name of the NFS’ server root file system
serial#
xxxxx
Board serial number
serverip
0.0.0.0
Boot server IP address
tftp_port
eTSEC_1
Selects which Ethernet port will be used for tftp
Valid options: eTSEC_1, eTSEC_2
Valid options: eTSEC_1, eTSEC_2
Variable:
Default
Value:
Value:
Description:
(continued)