ATI Technologies 107-40214-20 Benutzerhandbuch
Page 34
I have a monitor with three BNC connectors. Why won't it
work with my
RADEON
™
MAC
®
EDITION?
•
Monitors that only have three BNC connectors require a
synchronization (“sync”) signal to be sent down the green
line. This is called Sync-on-Green (SOG). ATI accelerator
cards do not output a SOG signal. Adapters are available
for your Mac OS computer to convert the separate sync
signal from the ATI card to a SOG signal for the monitor.
Check with your local Apple Authorized Dealer for
availability of SOG adapters.
synchronization (“sync”) signal to be sent down the green
line. This is called Sync-on-Green (SOG). ATI accelerator
cards do not output a SOG signal. Adapters are available
for your Mac OS computer to convert the separate sync
signal from the ATI card to a SOG signal for the monitor.
Check with your local Apple Authorized Dealer for
availability of SOG adapters.
I have a monitor with five BNC connectors. Why won't it
work with my
RADEON
™
MAC
®
EDITION?
•
For a cable with five BNC connectors, ensure that they are
all connected to the monitor. If only three of the cables are
connected (i.e., R, G, and B), the monitor is expecting a
Sync-on-Green (SOG) signal.
all connected to the monitor. If only three of the cables are
connected (i.e., R, G, and B), the monitor is expecting a
Sync-on-Green (SOG) signal.
•
Some monitors may have a switch to set the monitor to
either SOG or separate sync. If the switch is set to SOG, the
monitor will show a scrambled display. Setting the switch
to separate/composite sync may resolve the problem.
either SOG or separate sync. If the switch is set to SOG, the
monitor will show a scrambled display. Setting the switch
to separate/composite sync may resolve the problem.
•
A number of BNC cables, even though they are designed
for Mac OS computers, do not supply the sense code
needed by the graphics card. Using an adapter that sets the
appropriate sense code should solve the problem.
for Mac OS computers, do not supply the sense code
needed by the graphics card. Using an adapter that sets the
appropriate sense code should solve the problem.
After selecting a VGA monitor type in the VGA Monitors
dialog, I couldn’t change the resolution in the Resolutions
Supported scroll list.
dialog, I couldn’t change the resolution in the Resolutions
Supported scroll list.
•
This scroll list in the ATI Displays control panel only
shows the available resolutions for the monitor type
selected, and will not allow you to select and change
resolutions. Changing resolutions can only be done through
the standard Monitors control panel, Control Strip module,
shows the available resolutions for the monitor type
selected, and will not allow you to select and change
resolutions. Changing resolutions can only be done through
the standard Monitors control panel, Control Strip module,
or by using the Popup Menu supplied with the RADEON
™
MAC
®
EDITION.