ASUS P5G41T-M LX PLUS Benutzerhandbuch

2-18

Chapter 2: BIOS information

Sets the display mode for option ROM. Configuration options: [Force BIOS] [Keep Current]

Allows you to select the power-on state for the NumLock.  

Configuration options: [Off] [On]

When set to Enabled, the system waits for the F1 key to be pressed when error occurs. 

Configuration options: [Disabled] [Enabled]

When set to [Enabled], the system displays the message Press DEL to run Setup during 

POST. Configuration options: [Disabled] [Enabled]

The Security menu items allow you to change the system security settings. Select an item 

then press <Enter> to display the configuration options.

Select this item to set or change the supervisor password. The Supervisor Password item 

on top of the screen shows the default Not Installed. After you set a password, this item 

shows Installed.

To set a Supervisor Password:
1. 

Select the Change Supervisor Password item and press <Enter>.

2. 

In the password box, key in a password containing up to six letters or numbers, or 

both, then press <Enter>. 

3. 

Confirm the password when prompted. 

The message Password Installed appears after you successfully set your password.

To change the supervisor password, follow the same steps in setting a supervisor password.

To clear the supervisor password, select the Change Supervisor Password then press 

<Enter> twice. The message Password uninstalled appears.

If you forget your BIOS password, you can clear it by erasing the CMOS Real Time Clock 

(RTC) RAM. See section 1.9 Jumpers for information on how to erase the RTC RAM.

Set this item to [Enabled] to use the ASUS MyLogo2

™

 feature.

This allows you to enable or disable the full screen logo display feature. Configuration 

options: [Disabled] [Enabled]