Apple 2 MEG Plus Benutzerhandbuch

- -

First, TURN OFF THE POWER SUPPLY.

- -

Remove the cover from your IIe.

- -

Discharge any static electricity on your body by 
touching the IIe power supply case before touching 
any of the components.

*

Warning! Don’t ZAP your chips! There are many

static sensitive components in the IIe and on the
RamWorks and 2 MEG+ Memory Expander cards. Be
sure that you touch the power supply case before
continuing.

- -  Remove the RamWorks card.
- -  Carefully line up the pins on the underside of the 2

MEG+ Expander with the corresponding sockets on 
the chip side of the RamWorks card. Refer to the 
illustration below.

--

Press the pins gently but firmly into the sockets until 
they are fully seated. (Even when it's fully seated 
there may still be some of the pin showing between 
the connectors, so don’t press too hard!)

1