AMD LX 900@1.5W Benutzerhandbuch
AMD Geode™ LX Processors Data Book
419
Video Processor Register Descriptions
33234H
6.8.2
Video Processor Module Specific MSRs
6.8.2.1
VP Diagnostic MSR (MSR_DIAG_VP)
MSR Address
48002010h
Type
R/W
Reset Value
00000000_00000000h
MSR_DIAG_VP Register Map
63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32
RSVD
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
9
8
7
6
5
4
3
2
1
0
CM
NDM
SM
DVAL
D
TSEL
SP
MSR_DIAG_VP Bit Descriptions
Bit
Name
Description
63:32
RSVD
Reserved.
31
CM
32-Bit CRC Mode. Selects 32-bit CRC generation.
0: Disable.
1: Enable.
1: Enable.
30
NDM
New Dither Mode. Selects either the legacy dither mode, or new dither mode.
The legacy dither mode has an errata with the first pixel. The new dither mode fixes this
errata. This bit provided for backward compatibility.
errata. This bit provided for backward compatibility.
0: Legacy dither mode.
1: New dither mode.
1: New dither mode.
29:28
SM
Sim Mode. This field is used to put the VP in modes to aid verification.
00: Normal operation.
01: Graphics input bypasses VP and goes directly to FP.
10: Reserved.
11: Reserved.
01: Graphics input bypasses VP and goes directly to FP.
10: Reserved.
11: Reserved.
27:20
DVAL
DAC Test Value. 8-bit data value to drive to CRT DAC when selected by bit 19. Dupli-
cate copies of DAC Test Value are driven on DAC RGB.
cate copies of DAC Test Value are driven on DAC RGB.
crt_dac_r[7:0] = DAC Test Value[7:0] ([27:20] is this register)
crt_dac_g[7:0] = DAC Test Value[7:0] ([27:20] is this register)
crt_dac_b[7:0] = DAC Test Value[7:0] ([27:20] is this register)
To enable DAC Test Value to be driven to CRT DAC:
(DAC Test Value Select must = 0) AND
((VTM[6] = 0 AND MBD_MSR_DIAG[18:16] = 101h) OR
(VTM[6] = 1 AND VTM[3:0] = 0001h)
19
D
DAC Test Value Select. Selects which data stream is sent to CRT DAC during CRT
DAC test mode.
DAC test mode.
0: 24-bit data to CRT DAC = {3{DAC Test Value[27:20]}} (3 time repeated 8-bit value).
1: 24-bit data to CRT DAC = gfx_data[23:0] (raw input from Display Controller).
1: 24-bit data to CRT DAC = gfx_data[23:0] (raw input from Display Controller).
18:16
RSVD
Reserved. Reserved for test purposes. Set to 000 for normal operation.
15:0
SP
Spares. Read/write, no function.